MATERIAL SAFETY DATA SHEET

SECTION I - MANUFACTURER INFORMATION

SECTION II - HAZARDOUS INGREDIENTS/ SARA III INFORMATION

*Indicates toxic chemical(s) subject to the reporting requirements of section 313 of Title III and of 40 CFR372. No additional information available.

SECTION III - PHYSICAL/CHEMICAL CHARACTERISTICS

SECTION IV - FIRE AND EXPLOSION HAZARD DATA

Flash Point: 105 F
Method Used: TCC

Flammable Limits in Air by Volume - Lower: 0.6% Upper: 7.0

Extinguishing Media: Foam, CO2, dry chemical.

Special Firefighting Procedure: water may be used to ccool closed containers, to prevent pressure build-up.

Unusual Fire and Explosion Hazards: Keep containers closed tightly and away from sparks, open flames and other ignition sources. Closed containers may explode upon exposure to extreme heat.

SECTION V - REACTIVITY DATA

Stability: Stable.
Conditions to Avoid: Keep away from heat, sparks and open flames.

Incompatibility (Materials to Avoid): Strong Oxidizers.

Hazardous Decomposition or Byproducts: Carbon Dioxide, Carbon Monoxide, and oxides of Nitrogen.

Hazardous Polymerization: Will not occur.

SECTION VI - HEALTH HAZARD DATA

INHALATION HEALTH RISKS AND SYMPTONS OF EXPOSURE:
Breathing small amounts of this material during normal handling is not likely to cause harmful effects. Breathing large amounts may be harmful. Signs and symptoms of exposure to this material through breathing may include irritation of the nose, throat and airways, central nervous system depression (dizziness, drowsiness, weakness, fatigue, nausea, headache, unconsciousness and respiratory failure).

SKIN AND EYE CONTACT HEALTH RISKS AND SYMPTOMS OF EXPOSURE:
Prolonged or repeated contact may dry the skin. Symptoms may include redness, burning, drying and cracking of skin, and skin burns and stinging, redness and tearing of the eyes.

SKIN ABSORPTION HEALTH RISKS AND SYMPTOMS OF EXPOSURE:
A component of this material may be absorbe through the skin in potentially harmful amounts following prolonged exposure.

INGESTION HEALTH RISKS AND SYMPTOMS OF EXPOSURE:
Irritation to the mouth, throat and stomach. Not hazardous in normal industrial use. May cause nausea, vomiting, pain and stomach upset (e.g. Diarrhea).

HEALTH HAZARDS (ACUTE AND CHRONIC):
Eyes: Can cause severe irritation, redness, tearing and blurred vision. Skin: Prolonged or repeated contact can cause irritation, defatting, dermititus. Breathing: Inhalation can cause irritation, nausea, unconsciousness. Swallowing: will cause severe gastrointestinal irritation. Aspiration can be fatal.

CARCINOGENICITY: NTP CARCINOGEN: No; IARC MONOGRAPHS: No.
OSHA REGULATED: Yes
No supplementary information

MEDICAL CONDITIONS GENERALLY AGGRAVATED BY EXPOSURE:
Preexisting eye, skin and respiratory disorders may be aggravated by exposure to this product.

EMERGENCY AND FIRST AID PROCEDURES:
EYE CONTACT: Immediately flush eyes with plenty of water for at least 15 minutes while holding eyelids open. Rinse continuously with water while on way to get medical attention.
SKIN CONTACT: Immediately remove contaminated clothing or shoes, wipe excess from skin and flush with plenty of water for at least 15 minutes. Use soap if readily available or follow by thorough washing with soap and water. Do not reuse clothing until thoroughly decontaminated. Get medical attention.
INHALATION: Remove victim to fresh air and provide oxygen if breathing is difficult. Give artificial respiration if not breathing. Get medical attention.
INGESTION: Do NOT induce vomiting. Give one glass of water unless victim is drowsy, convulsing, or unconscious. Seek medical attention immediately.
NOTE TO PHYSICIANS: This material is an aspiration hazard. Potential danger from aspiration must be weighed against possible oral toxicity when deciding to induce vomiting.

SECTION VII - PRECAUTIONS FOR SAFE HANDLING AND USE

STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED:
Ventilate area. Avoid breathing vapors. Eliminate ignition sources. Use self-contained breathing apparatus or air mask in confined area for large spills. Contain spill. Use absorbent clay or sawdust to absorb spill. Place in a closed chemical waste container.

WASTE DISPOSAL METHOD:
Store below 90 Deg F. Do not reuse empty containers. Do not use product near sources of ignition or open flames. Keep unused containers closed. Do not take internally.

OTHER PRECAUTIONS:
Avoid inhalation of vapors and skin contact where possible. Remove contaminated clothing and shoes at once. Wash all exposed areas with soap. Reports have associated prolonged exposure to solvents with brain and nervous system damage. Intentional misuse by inhaling concentrated vapors may be fatal. Target organs: Eyes, Skin, Liver, Respiratory and Central Nervous Systems. FIRE DANGER! This product contains natural oils that can cause SPONTANEOUS COMBUSTION in some materials if not disposed of properly. DO NOT throw rags or items with the product on them in a trash container. Place rags and other items with the product on them in a metal container filled with water, seal the container, and dispose of it in accordance with local, State and Federal regulations.

SECTION VIII - CONTROL MEASURES

RESPIRATORY PROTECTION:
Use a NIOSH approved respirator to remove overspray when spraying outdoors or in a well ventilated area. In closed areas use a NIOSH approved respirator with a combination mechanical filter/chemical cartridge to remove overspray and organic vapors.

VENTILATION:
Provide sufficient mechanical (general and/or local exhaust) ventilation to maintain exposure below recommended TLV at all times.

PROTECTIVE GLOVES:
Neoprene or other non-porous gloves are recommended.

EYE PROTECTION:
Safety glasses w/splash shields or chemical goggles is recommended.

OTHER PROTECTIVE CLOTHING OR EQUIPMENT:
Neoprene or plastic apron and protective clothing covering exposed skin areas.

WORK/HYGIENIC PRACTICES:
Wash contaminated clothing before reusing. Wash hands before eating, smoking or using the bathroom.

Section IX - DISCLAIMER

The information contained herein is based on the data available to us and is believed to be correct. However, Wood Iron Wood Finishes, Inc. makes no warranty, expressed or implied regarding the accuracy of these data or the results to be obtained from the use thereof. Wood Iron Wood Finishes, Inc. assumes no responsibility for injury from the use of the product described herein.
NA= Not applicable; ND= No data; TLV= Threshold limit value; PEL= Personal exposure limit; TWA= Time weighted average; MSA= Mine Safety Associates; NIOSH= National Institute for Occupational Safety and Health.

OTHER COMMENTS

We recommend that empty containers be either professionally reconditioned for reuse by certified firms or properly disposed of by certified firms to help reduce the possibility of an accident. Disposal of containers should be in accordance with applicable federal, state and local laws and regulations. "Empty" cans should not be given to individuals.

The information in this MSDS was obtained from sources which we believe are reliable. However, the information is provided without any representation or warranty, expressed or implied, regarding it's accuracy or completeness. Recipients are advised to confirm in advance of need that the information is current, applicable, and suitable to their circumstances.

The conditions of handling, storage, use and disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product.