|
Exterior
Finish Product Information
Product
Info / Exterior Finish
Exterior
Finish Navigation
General
Directions for Wood Iron Exterior Finishes
Quick Reference Guide
for Maintenance or Refinishing
Tint
Samples of Wood Iron Finish
"What
is an Exterior Wood Finish?"
- What to look for in a finish.
Exterior FAQ - Answers
to frequently asked exterior finishing questions.
Comprehensive Wood Iron Video
Library of refinishing projects
 Wood
Iron is the most comprehensive exterior wood finish on the market today.
Some products have good water repellency while lacking UV inhibitors.
Other products use coarse iron oxide pigments that obscure the wood
grain. The ingredients of Wood Iron will protect wood under any given
condition wood is normally subjected to when used for siding, fencing,
roofing, or decks.
- Wood
Iron New Wood/Recoat Grade, Restoration Grade and Water-Borne have a blend of natural oils, resins, and copolymers that penetrate
into the wood cells and fibers. After the oil has solidified the structural
integrity of the wood is restored. Wood Iron Generations Wood Finish is our non-oil based finish that is a blend of acrylics with elastomeric properties and is water-based.
- Wood
Iron accentuates the beauty and grain of the wood. The transparent
oxide tints combined with additional UV absorbers and stabilizers
provide protection from the sun's ultra-violet rays and the effect
magnifies the natural beauty of the wood.
- Wood
Iron has a water repellent to prevent water from penetrating into
the wood.
- Wood
Iron contains a powerful yet safe mildewcide to prevent the growth
of mold, mildew or algae on the coating film.
Wood
Iron Exterior New Wood/Recoat Grade Finish
Contains
approximately 50% solids. Perfect for new wood or maintenance coats
over previous coats of Wood Iron!
This Exterior Spec Sheet
contains information on directions for proper use of Wood Iron Exterior
Finishes. Home owners should have contractors bid their finishing
job to this standard.
MSDS
Sheet for New Wood/Recoat Grade Finish.
Wood
Iron Exterior Restoration Grade Finish
Contains
approximately 70% solids. Primarily used for the more neglected woods
and very old wood in need of restoration.
This
Exterior Spec Sheet
contains information on directions for proper use of Wood Iron Exterior
Finishes. Home owners should have contractors bid their finishing
job to this standard.
MSDS
Sheet for Restoration Grade Finish.
Wood
Iron Water-Borne (Oil Emulsion) Exterior Finish
Contains
approximately 60% solids. Primarily used for environments that require
a wood finish with lower V.O.C.s. Emulsified oils and resins protect
new and older wood surfaces. The same UV absorbers and stablilizers,
water repellent and mildewcide work hard in Wood Iron Water-Borne
to protect wood from damage from the environment.
This Exterior Spec Sheet contains information on directions for proper use of Wood Iron Water-Borne
Exterior Finish. Home owners should have contractors bid their finishing
job to this standard.
MSDS Sheet for Wood
Iron Water-Borne Exterior Finish.
Wood
Iron Generations Water-Based Exterior Finish
Blended acrylic and elastomeric resins make this finish durable and environmentally friendly. It has virtually no odor, is fast-drying and is
non-flammable. Soap and water are all that are required for clean up. Generations is compatable with other water-based wood finishes and can be applied over cured oil-based finishes. UV absorbers and stablilizers,
water repellent and mildewcide work exceptionally well in Wood Iron Generations
to protect wood from damage from the environment.
MSDS Sheet for Wood
Iron Generations Exterior Finish.
|
